|
Static
spargers.
Tank
spargers.
In-tank
sparging applications can be for batch or
continuous operation, with or without agitation within the
vessel. Mott sparging technology provides performance-proven
designs to assure optimum process operation.
Mott spargers are arranged in the bottoms
of tanks and vessels in a variety of ways. For smaller tanks,
one sparger will often suffice. For larger tanks, several
Mott spargers may be manifolded together using a linear or
radial pattern to achieve optimal gas diffusion.
Mott offers a wide variety of standard tank
sparger elements and manifolded assemblies to accommodate
most applications. Custom designs are also available by request.
|
Typical
tank sparger arrangements
|
|
|
|
|
Single
Element
Type 6400 Element
Side Mounted
|
Multiple
Elements
Type 6400 Elements
Side Mounted
|
| |
|
|
|
|
|
Single
Element
Type CD Element
Dip Leg Mounted
|
Single
Elements
Type CD Element
Flanged Side Mounted
|
| |
|
|
|
|
|
Manifolded
(Cross)
Type A Elements
Dip Leg Mounted
|
Cross
Tank
Type A Elements
Flanged Side Mounted
|
Sparger
elements.
Type
A
Hex Nipple
From 0.375" up to 2.5" diameter |
 |
| |
|
Type
CD
Reinforced 1.5", 2" and 2.5" diameter |
 |
| |
|
Type
G
Plain Tube
From 0.375" up to 2.5" diameter |
 |
| |
|
Type
6400
Reducer Mounted
From 0.375" up to 1" diameter |
 |
| |
|
Type
850
Reducer Mounted
Impingement Tube
From 0.375" up to 1" diameter |
 |
| |
|
Type
R
Trapped Flange Mounted
From 0.375" up to 2.5" diameter |
 |
| |
|
Type
RF
Full Flange Mounted
From 0.375" up to 2.5" diameter |
 |
| |
|
Type
RS
Sanitary Flange Mounted
From 0.375" up to 2.5" diameter |
 |
Elements
larger than 2.5" diameter are available on special order.
Support
Studs or Centering Rods on the closed end of elements available
if required.
Reinforced
elements are recommended for agitated vessels.
Standard
materials are 316L stainless steel porous media with 316 stainless
steel hardware. Other materials are available on special order.
|
