Dynamic pipeline spargers.

Non-intrusive (in-line) sparging.

Mott GasSavers^® are unique, high-efficiency gas/liquid contacting devices for in-line mounting in process systems. As liquid moves through the inside of a porous metal tube, gas is introduced into the annulus – the area between the porous tube wall and the outer GasSaver housing. The gas moves through the porous metal into the liquid, creating bubbles which are quickly sheared. This action results in very fine bubbles, ideal for gas introduction as well as absorption.

Mott Laboratory GasSavers
All Welded Construction

Mott Industrial GasSavers

Mott Sanitary GasSavers

All Welded GasSaver^®

Industrial GasSaver®
Sanitary GasSaver®

Side stream sparging.

In large installations where access to the main pipeline is difficult, a “side stream” GasSaver installation often proves to be the best configuration for optimum process performance. Units can be valved to allow maintenance without interfering with the main pipeline.

Intrusive (tangential) sparging.

A sparging element located in a pipeline constitutes an intrusive sparger. The element can be mounted in an elbow or tee in the pipeline. Liquid passes through the annulus between the pipeline and the element. Gas exits from the outside of the element where bubbles are sheared by the liquid, resulting in fine bubbles for superior performance.

Instrusive Pipeline Spargers

Pipe Mounted Intrusive Sparger Elements

Elbow Mounted
Side Mounted		Tee Mounted
Side Angle Mounted		Sanitary Tee Mounted